Configuring a Manual Pattern

Users can manually change or enter one or more patterns using the XpoLog Patterns Language, to apply on the log records. Applying a detailed pattern is not mandatory, as all data is searchable either way, however it may ease the search and allow to use more functionality on the log fields (correlations, average, minimum, maximum, group by, searching specific fields, etc.).

To open the patterns editor edit a log and go 'Next'. The pattern editor is presented:

To configure a manual pattern:

1. The upper part presents original data, taken from the first 50 lines of the log files. It is possible to modify the data in this area and click verify to check the pattern on different types of records.
2. In the toolbar of the central pane, near Pattern Editor, the wizard enables setting up patterns via suggested options by XpoLog. Click Manual to switch to manual mode when you can enter pattern using the Pattern language (see XpoLog Patterns Language).
   Note: if multiple patterns are configured, XpoLog tries to match records to a pattern starting from pattern 1, then pattern 2, etc. Therefore, the most narrowed pattern should be placed first and the widest last.
3. Click the 'Verify' button after any changes made in order to confirm that changes were applied correctly - result is presented at the lower part of the screen.