Installation

General

At its basic format, XPLG installs as a single process. This process includes everything that is needed to run and use XPLG.
The system scales easily by running multiple processes that supports high daily volumes and data retention. See XPLG Architecture for more information.

This topic includes installation instructions for the following operating systems:

Installing on Windows 

You may want to print these instructions. When you are ready to install, go to XPLG site www.xplg.com to the Download Center.

Part One: Downloading Your New Software

To download your new software:
  1. On the XPLG download page, click the link or button for the product that you want to download.

  2. When you are done, click the Download link or the Download Now button.
    Note: Be sure to click the Download Now button for the product you want to install.

  3. Do one of the following:

  • If the software is downloaded automatically into a default folder, you see a download progress dialog box. Make a note of the directory (folder) and filename for the software that you are downloading.

  • If a "Save As" dialog box appears, choose a folder and filename for the software that you are downloading.

Part Two: Installing Your New Software

To install your new software:
  1. After downloading is complete, you may see a "Download successful" dialog box.

  2. Open the folder into which the new software was downloaded, copy it to the target machine, and double-click the file that you downloaded. For instance, if you downloaded XPLG, double click the “exe” file. Depending on what you are installing, you may see the Install Anywhere dialog box.

  3. When the XPLG Setup Welcome screen appears, read the information and click Next.
    Note: Read the instructions on the following screens. The screens vary depending on what you are installing, but in general you are asked to do some or all of the instructions in the following steps.

  4. Choose a destination directory (folder). This is the location where the new software will be installed, normally C:\Program Files\XpoLogCenter. If you install your new software into the XPLG folder that contains your current version of the software, your current version will be overwritten. If you wish to keep a copy of the old version as a backup, simply choose or create a new folder for the software that you are about to install.

  5. Choose a name for the program group; the default is XpoLog. Then, click Next.

  6. Verify all the details in the preview screen and click Install.
    Note: if you want to edit any of the details that are presented in the preview screen, click Previous to return to the desired location.

  7. When you see the prompt telling you that installation is complete, click Done
    XPLG starts automatically unless you specified differently during the installation.


Important: At any step, you can click cancel to quit the installation.



Part Three: Running Your New Software

XpoLog starts automatically after installation unless you specified differently. There is a single process - XpoLogCenter, which is presented in the Windows Services panel. It is highly recommended to configure a user on the XpoLogCenter service, which XpoLog can use while reading logs from machines in the environment.

To run your new software:
  1. Recommended: In the Windows Services panel, under the log on tab, type a username that XPLG service can use in order to connect and read logs over the Windows network authentication in your organization.

  2. Open a browser with the following URL: http://MACHINE_NAME:30303 and you will be redirected to XPLG homepage. 

Installing on Linux

You may want to print these instructions. When you are ready to install, go to XpoLog site www.xplg.com to the Download Center.

Part One: Downloading Your New Software

To download your new software:
  1. On the XPLG download page, click the link or button for the product that you want to download.

  2. When you are done, click the Download link or the Download Now button.
    Note: Be sure to click the Download Now button for the product that you want to install.

  3. Do one of the following:

  • If the software is downloaded automatically into a default folder, you see a download progress dialog box. Make a note of the directory (folder) and filename for the software that you are downloading.

  • If a "Save As" dialog box appears, choose a folder and filename for the software that you are downloading.

Part Two: Installing Your New Software

To install your new software:

After downloading is complete, you may see a "Download successful" dialog box. If you see this dialog box, copy the installation file to your Linux machine.

  1. Open the folder that the new software was downloaded into, and gunzip the file that you downloaded: gunzip XpoLogCenterSetup-64.bin.gz

  2. After unzipping the file, execute the .bin file: sh XpoLogCenterSetup-64.bin
    The installation wizard will start.

  3. When the XpoLog Setup message appears, read the information and follow the installation process.

  4. Read the instructions on each step.

  5. When you see the prompt telling you that installation is complete, XPLG will be started automatically unless you specified differently.

Important: At any step, you can click cancel to quit the installation.

Part Three: Running Your New Software

XPLG starts automatically after installation unless you specified differently. There are several useful commands for starting, stopping, restarting, or finding out the status of the server:

  1. cd to the installation directory of XPLG

  2. XPLG should start automatically after installation. To control and verify, use these commands:
    Start XPLG – sh /…/XpoLogCenter/runXpoLog.sh start
    Stop XPLG – sh /…/XpoLogCenter/runXpoLog.sh stop
    Check Status – sh /…/XpoLogCenter/runXpoLog.sh stat

  3. Open a browser with the following URL: http://MACHINE_NAME:30303.
    You will be redirected to the XPLG homepage. 

  4. It is highly recommended to install XPLG as a service using the system and service manager of Linux (systemctl).

Installing on Mac OS X

You may want to print these instructions. When you are ready to install, go to XpoLog site www.xplg.com to the Download Center.

Part One: Downloading Your New Software

To download your new software:
  1. On the XPLG download page, click the link or button for the product that you want to download.

  2. When you are done, click the Download link or the Download Now button.
    Note: Be sure to click the Download Now button for the product that you want to install.

  3. Do one of the following:

  • If the software is downloaded automatically into a default folder, you see a download progress dialog box. Make a note of the directory (folder) and filename for the software that you are downloading.

  • If a "Save As" dialog box appears, choose a folder and filename for the software that you are downloading.

Part Two: Installing Your New Software

To install your new software:

After downloading is complete, you may see a "Download successful" dialog box. If you see this dialog box, click Install and go on to step 3. Otherwise, continue with step 2.

  1. (Skip this step if installation has already started.) Open the folder that the new software was downloaded into, copy it to the target machine, and unzip the file that you downloaded. For instance, if you downloaded XPLG , unzip the downloaded file (unzip XpoLogCenterSetup.zip).

  2. After unzipping the file, ensure there are sufficient permissions to run the file:

    1. Open a terminal and cd to the location where you extracted the file

    2. Run: sudo chmod -R 755 XpoLogCenterSetup.app/

  3. execute the installer - Right Click the XpoLogCenterSetup and select Open.
    The installation wizard will start.

  4. When the XPLG Setup message appears, read the information and follow the installation process.

  5. Read the instructions on each step.

  6. When you see the prompt telling you that installation is complete, XPLG will be started automatically.

Important: At any step, you can click cancel to quit the installation.

 

Part Three: Running Your New Software

XPLG starts automatically after installation unless you specified differently. There are several useful commands for starting, stopping, restarting, or finding out the status of the server:

  1. cd to the installation directory of XPLG

  2. XPLG should start automatically after installation. To control and verify, use these commands:
    Start XPLG – sh /…/XpoLogCenter/runXpoLog.sh start
    Stop XPLG – sh /…/XpoLogCenter/runXpoLog.sh stop
    Check Status – sh /…/XpoLogCenter/runXpoLog.sh stat

  3. Open a browser with the following URL: http://MACHINE_NAME:30303.
    You will be redirected to the XPLG homepage. 

  4. It is highly recommended to install XPLG as a service using the system and service manager of Linux (systemctl).

Installing on UNIX without internal JVM (JAVA Provided Externally)

You may want to print these instructions. When you are ready to install, go to XpoLog site www.xplg.com to the Download Center.
This XPLG Installer does not contain JAVA and uses an external JAVA which should already be available on the machine that you plan to run XpoLog on. Important: JAVA 17 is required.

Part One: Downloading Your New Software

To download your new software:
  1. On the XPLG download page, click the link or button for the product that you want to download (without internal JVM).

  2. Log in to the target machine with the same user you plan to run XPLG with to ensure JAVA is available. Run the command 'java -version' and confirm the output is JAVA 17.
    If the java command does not return a result or the JAVA version is not 17, please contact XpoLog Support for additional information.

  3. Do one of the following:

  • If the software is downloaded automatically into a default folder, you see a download progress dialog box. Make a note of the directory (folder) and filename for the software that you are downloading.

  • If a "Save As" dialog box appears, choose a folder and filename for the software that you are downloading.

Part Two: Installing Your New Software

To install your new software:

After downloading is complete, you may see a "Download successful" dialog box. If you see this dialog box, click Install and go on to step 3. Otherwise, continue with step 2.

  1. (Skip this step if installation has already started.) Open the folder that the new software was downloaded into, copy it to the target machine, and gunzip the file that you downloaded. For instance, if you downloaded XPLG, gunzip the downloaded file (gunzip XpoLogCenterSetupNoJava.bin.gz).

  2. After unzipping the file, execute the .bin file (sh XpoLogCenterSetup.bin).
    The installation wizard will start.
    Note: the installation wizard looks for a local JAVA to be used, it is possible to specify the full JAVA path that should be used, by executing the installation with a specified JAVA full path (sh XpoLogCenterSetupNoJava.bin LAX_VM "/FULL/PATH/TO/JAVA/EXECUTABLE")

  3. When the XpoLog Setup message appears, read the information and follow the installation process.

  4. Read the instructions on each step.

  5. When you see the prompt telling you that installation is complete, XpoLog will be started automatically, unless you specified otherwise during installation.

Important: At any step, you can click cancel to quit the installation.

Part Three: Running Your New Software

XPLG starts automatically after installation unless you specified differently. There are several useful commands for starting, stopping, restarting, or finding out the status of the server:

  1. cd to the installation directory of XPLG

  2. XPLG should start automatically after installation. To control and verify, use these commands:
    Start XPLG – sh /…/XpoLogCenter/runXpoLog.sh start
    Stop XPLG – sh /…/XpoLogCenter/runXpoLog.sh stop
    Check Status – sh /…/XpoLogCenter/runXpoLog.sh stat

  3. Open a browser with the following URL: http://MACHINE_NAME:30303.
    You will be redirected to the XPLG homepage. 

  4. It is highly recommended to install XPLG as a service using the system and service manager of Linux (systemctl).

 


Thank you for installing XPLG