HTTP Forwarder

Owned by Haim Koschitzky
Last updated: May 01, 2022 by Noga Aviram (Unlicensed)
1 min read

To send data over HTTP Forwarder:

  1. Go to Manager > Left Navigation Panel > Data > Data Forwarding > New Data Forwarder:

  2. Enter a name for this forwarder.

  3. Mark or define the sources which will be sent via this forwarder.

  4. Set the Scheduler for this forwarder. (default and most recommended is ‘Send data on arrival’ - real-time)

  5. Create Data Flows on the data (Optional). Read More>

  6. Add a new HTTP Forwarder. For each HTTP Forwarder the following should be configured:

    1. Name: The name of the HTTP Forwarder.

    2. Description: The description of the HTTP Forwarder.

    3. Enabled: The HTTP forwarder is enabled by default, uncheck for disabling.

    4. HTTP Account: Choose the relevant HTTP account for this forwarder. To create a HTTP Account, follow the article: Creating An Account.

    5. Wrap With Message.

    6. Advanced: Enter a data filter query.

    7. Active Flows: Use one of the existing flows or send ‘All data’.

  7. Save the HTTP Forwarder.

  8. Data from this HTTP Forwarder will be sent to the configured device.